AEV Lighting Harnesses for JL Wrangler & Gladiator

AEV Lighting Harnesses for JL Wrangler & Gladiator


Open a picture of the product $126.00 Qty:
Open a picture of the product $111.00 Qty:

AEV Jeep JL Wrangler and Gladiator fog light wiring harnesses are an application-specific, plug-n-play solution for customers adding lights to their AEV Front/Rear Bumper. These wiring harnesses feature dedicated circuits for each light (or pair of lights) and integrate directly to the OEM auxiliary switches. When it comes to installing lights, there is no easier, cleaner, or safer way to do it! 

AEV Front Bumper & Skid Plate Light Harness

The AEV Front Bumper & Skid Plate Lighting Harness is designed specifically for adding a pair of AEV 7000 Series Off-Road Lights and a 20” Baja Designs Light Bar to the AEV EX/RX Front Bumper and Front Skid Plate. Compatible with both Wrangler & Gladiator

AEV Rear Bumper & Tire Carrier Light Harness

The AEV Rear Bumper & Tire Carrier Light Harness features two dedicated circuits for adding a single 3” Baja Designs auxiliary light to the AEV Rear Bumper as well as a universal lead for adding a chase light or work light on the mast of the AEV Tire Carrier. Compatible with Wrangler only.

Product Features:

  • Fits JL Wrangler & Gladiator
  • Plug-n-play installation
  • 12-gauge wiring
  • Integrated thermal and voltage protection
  • Requires OEM Aux Switches

Product FAQs

Can I use these harnesses with a “brand X” bumper or lights?

These wiring harnesses are specifically designed for an AEV Front Bumper + AEV 7000 Series Lights + Baja Designs Light Bar or an AEV Rear Bumper + Baja Designs 3” Aux Light. Additionally, the physical dimensions of the harnesses will be specific to these combinations as well. While they may be able to be modified to work, we cannot guarantee a plug-n-play installation or offer technical advice on anything outside of these combinations.  

Can I hook these up to an aftermarket switch product like an SPod?

Most likely, but depending on what switch product you are using, you may need to make some minor modifications. All the vehicle-side plugs are designed to integrate with the OEM auxiliary switches.

Is there any sort of circuit protection built into these harnesses?

Yes, we designed both thermal and voltage protection into these harnesses.

How many open switches will I need?

Depending on how many lights you are installing, up to four. Each harness has two dedicated circuits. Each circuit being used will require one open switch. Therefore, someone with a pair of 7000 lights, light bar and a rear auxiliary light would require three switches.

Do these harnesses include the switches?

No, the AEV Lighting Harnesses are designed for and require the OEM auxiliary switches. Many vehicles are equipped with these from the factory, but they are also available as an aftermarket Mopar accessory.

Where are these wiring harnesses made?

AEV Lighting Harnesses are proudly made in the USA!