AEV Kinetic Recovery Rope AEV Kinetic Recovery Rope
A Kinetic Recovery Rope is the perfect recovery tool for freeing a vehicle that is stuck in deep mud, sand, snow or silt. Kinetic Energy Recovery Ropes are much safer and more effective than a tow rope or chain since they have the ability to stretch under load, which allows it to use its own kinetic energy to assist in the recovery and dislodge a stuck vehicle.
AEV’s 7/8” x 30’ Kinetic Recovery Rope features a minimum breaking strength (MBS) of 29,000lbs. and is made from a heavy duty, double braided nylon with a loop at each end that is reinforced for added protection against abrasion.
Please Note: Minimum Breaking Strength (MBS) is the minimum force necessary to cause a recovery device to break or fail. Working Load Limit (WLL) is the recommended maximum force a recovery device is intended to safely support, when the force is applied in-line and through the centerline of the device. The WLL is calculated by dividing the Minimum Breaking Strength (MBS) by a safety factor that is generally around 4-to-1. For example, the AEV Snatch Block has an MBS of 52,000 LBS, so when divided by a safety factory of 4-to-1, the WLL becomes 13,000 LBS.
$ 189.00
Qty:
AEV Utility Rope AEV Utility Rope
AEV’s Utility Rope is the multi-tool of vehicle recovery gear. It can be used as a 10’ winch extension line, a tree saver, a rock line, a rigging bridle (works perfectly with AEV’s front bumper) and even as a means to attaching recovery gear to non-standard attachment points such as a roll cage or b-pillar.
The AEV Utility Rope is meant to be used in a variety of situations, so it will inevitably see some serious abuse. In order to make sure this rope can take whatever you throw at it, we manufactured it out of ultra-strong and ultra-durable Dyneema® SK78 synthetic fiber with a double layer of chafe protection to protect against sharp edges and rough surfaces. AEV Rope Strap included for easy and convenient storage.
Part Number
Dimensions
Minimum Breaking Strength (MBS)
Working Load Limit (WLL)
80808006AA
3/8" x 10'
19,600 LBS (8,890 KG)
4,900 LBS (2,222 KG)
80808025AA
1/2" x 10'
34,300 LBS (15,558 KG)
8,575 LBS (3,972 KG)
Please Note: Minimum Breaking Strength (MBS) is the minimum force necessary to cause a recovery device to break or fail. Working Load Limit (WLL) is the recommended maximum force a recovery device is intended to safely support, when the force is applied in-line and through the centerline of the device. The WLL is calculated by dividing the Minimum Breaking Strength (MBS) by a safety factor that is generally around 4-to-1. For example, the AEV Snatch Block has an MBS of 52,000 LBS, so when divided by a safety factory of 4-to-1, the WLL becomes 13,000 LBS.
$ 129.00
Qty:
AEV Winch Extension Rope AEV Winch Extension Rope
Adding a winch to your vehicle is one of the most important upgrades anyone who travels to remote locations can make. However, sometimes having just a winch is not enough. A Winch Extension Rope safely extends the length of your winch’s cable enough to reach your desired recovery or anchor point. If a vehicle recovery involves one or more snatch blocks, you are even more likely to come up short on cable, so keeping an AEV Winch Extension Rope in your recovery kit ensures that your future recovery efforts will never fall short.
Manufactured out of genuine Dyneema ® SK78 synthetic fiber for maximum strength and durability. AEV Rope Strap included for easy and convenient storage.
Part Number
Dimensions
Minimum Breaking Strength (MBS)
Working Load Limit (WLL)
80808008AA
3/8"x30'
18,200 LBS (8,255 KG)
4,550 LBS (2,065 KG)
80808024AA
1/2"x30'
34,300 LBS (15,558 KG)
8,575 LBS (3,889 KG)
Please Note: Minimum Breaking Strength (MBS) is the minimum force necessary to cause a recovery device to break or fail. Working Load Limit (WLL) is the recommended maximum force a recovery device is intended to safely support, when the force is applied in-line and through the centerline of the device. The WLL is calculated by dividing the Minimum Breaking Strength (MBS) by a safety factor that is generally around 4-to-1. For example, the AEV Snatch Block has an MBS of 52,000 LBS, so when divided by a safety factory of 4-to-1, the WLL becomes 13,000 LBS.
$ 179.00
Qty:
AEV Soft Shackle AEV Soft Shackle
AEV Soft Shackles are lightweight, strong and versatile, making them a safe and viable option when a traditional D-ring anchor shackle cannot be used. AEV Soft Shackles are manufactured from premium Dyneema® SK78 synthetic fiber and feature an additional layer of chafe protection to protect against damage from sharp edges and rough surfaces.
Part Number
Dimensions
Minimum Breaking Strength (MBS)
Working Load Limit (WLL)
80808005AA
3/8" x 12"
35,000 LBS (15,875 KG)
8,750 LBS (3,969 KG)
80808031AA
1/2" x 18"
60,250 LBS (27,328 KG)
15,062 LBS (6,832 KG)
Please Note: Minimum Breaking Strength (MBS) is the minimum force necessary to cause a recovery device to break or fail. Working Load Limit (WLL) is the recommended maximum force a recovery device is intended to safely support, when the force is applied in-line and through the centerline of the device. The WLL is calculated by dividing the Minimum Breaking Strength (MBS) by a safety factor that is generally around 4-to-1. For example, the AEV Snatch Block has an MBS of 52,000 LBS, so when divided by a safety factory of 4-to-1, the WLL becomes 13,000 LBS.
$ 49.00
Qty:
AEV Recovery Gear Bag AEV Recovery Gear Bag
It's late at night and you are stuck on the trail. Nobody around for miles. You just finished unloading half your vehicle, looking for that one piece of recovery gear you need but cannot find and...what was that, thunder? We've all been there. AEV’s Recovery Gear Bag makes sure that will never happen again.
Designed with all the contents of a REAL recovery kit in mind, this bag is large enough to store all your essential recovery gear and its wide opening top allows for quick retrieval and storage. Heavy duty nylon construction, reinforced straps and a plastic bottom ensure that the AEV Recovery Gear Bag will hold up to years of use out on the trail.
Proudly made in the USA.
$ 159.00
Qty:
AEV EZ Tire Deflator AEV EZ Tire Deflator
Running the proper air pressure for the type of terrain you are traveling on is a fundamental of off-roading. The less air pressure you have in your tires, the larger the contact patch you will have, giving you the largest footprint possible for maximum traction on soft surfaces such as snow or sand. A tire with lower tire pressure will also provide considerably more traction when climbing over obstacles because the tire can conform to the surface and grab on to whatever you are trying to get over. Additionally, lower tire pressure allows the sidewall to flex more for a comfortable ride on the trail and a decreased risk of tire damage from sharp rocks, roots, etc.
AEV's EZ Deflator allows you to quickly and safely remove the valve stem core for rapid tire deflation. Simply screw the EZ Tire Deflator onto the valve stem. Turn the deflator knob counter clockwise to unscrew the valve stem core. Then slide the collar up to begin releasing air. Slide the collar back down to stop the airflow or to check your air pressure. Finally, screw the valve core back into the valve stem and remove the EZ Tire Deflator.
The AEV EZ Deflator has been engineered and tested to ensure accuracy, without being affected by temperature, humidity or altitude. A high visibility, yellow rubber guard protects the easy to read dial that displays air pressure from 0-60 PSI in 1 PSI increments. A convenient storage pouch is included to keep your EZ Deflator safe when not in use.
$ 37.00
Qty:
AEV Snatch Block AEV Snatch Block
Anyone who is serious about off-road adventure knows that it is just a matter of time before their vehicle becomes seriously stuck. At these moments a winch is often the best tool to free the vehicle, but sometimes the load on the winch can be so severe that it actually exceeds its pulling capacity. This is the time when a Snatch Block is indispensable. With AEV’s Snatch Block, you can rig a double-line pull to effectively multiply the pulling power of your winch by two times and simultaneously slow down the line speed by half – making for a safer and more controlled vehicle recovery.
Key features of the AEV Snatch Block include a virtually bomb-proof ArmorGalv® coating, self-lubricating Oilite® bushing with a specialized polymer pulley, and an industry-first, inward-rolled eyelet for safe engagement with ropes and soft-shackles. The AEV Snatch Block can be used with BOTH a traditional steel cable or a synthetic winch line.
AEV is the first in the 4WD aftermarket to follow the commercial rigging industry by marking all of its recovery gear with not only the Maximum Breaking Strength, but also the Working Load Limit. Safety first!
Proudly made in the USA.
$ 115.00
Qty:
AEV Rope Tie AEV Rope Tie
AEV's Rope Ties are an excellent way to keep your recovery ropes and electric power cords securely wrapped up when stored away. These handy rope ties are fully adjustable and feature a velcro closure.
Sold as a pair and proudly made in the USA.
$ 20.00
Qty:
Winch Hook Isolator Winch Hook Isolator AEV's Winch Hook Isolator eliminates unwanted rattles or the need to attach your winch hook to a recovery point when not in use. Installation is easy - simply disconnect your winch hook, run your cable through the isolator and reinstall your hook. Once installed, AEV's Winch Hook Isolator rests between the rollers of your fairlead and will not interfere with winching operations. Solid urethane construction and proudly made in the USA.
$ 30.00
Qty:
3/4 Inch Anchor Shackle 3/4 Inch Anchor Shackle
$ 26.00
Qty:
1 Inch Anchor Shackle 1 Inch Anchor Shackle
$ 41.00
Qty:
AEV Kinetic Recovery Strap AEV Kinetic Recovery Strap
AEV’s 30-foot kinetic Recovery Strap is a robust recovery tool, perfectly suited for freeing a vehicle that is stuck in deep mud, sand, snow, or silt. Unlike a traditional tow chain, which can recoil dangerously if it snaps or breaks loose, this nylon web sling will stretch under load, using its own kinetic energy to help dislodge the stuck vehicle.
AEV is dedicated to bringing more safety and continuity to the recovery gear that 4WD enthusiasts around the world rely on to get out of these potentially hazardous or life threatening situations and this is the only Recovery Strap in the aftermarket that complies with industrial rigging standards. To further maximize the service life of this Recovery Strap, a unique edge guard was added for improved protection against cuts and abrasion.
Part Number
Dimensions
Minimum Breaking Strength (MBS)
Working Load Limit (WLL)
80808015AA
3"x30'
24,000 LBS (10,886 KG)
6,000 LBS (2,722 KG)
80088023AA
4"x30'
39,200 LBS (17,780 KG)
9,800 LBS (4,445 KG)
Please Note: Minimum Breaking Strength (MBS) is the minimum force necessary to cause a recovery device to break or fail. Working Load Limit (WLL) is the recommended maximum force a recovery device is intended to safely support, when the force is applied in-line and through the centerline of the device. The WLL is calculated by dividing the Minimum Breaking Strength (MBS) by a safety factor that is generally around 4-to-1. For example, the AEV Snatch Block has an MBS of 52,000 LBS, so when divided by a safety factory of 4-to-1, the WLL becomes 13,000 LBS.
$ 99.00
Qty:
AEV Tree Strap AEV Tree Strap
Treading lightly and protecting our natural resources when out on the trail is imperative to ensure that future generations continue to have access to public land that is open for recreational off-roading. AEV’s Tree Strap allows a winch cable to be safely anchored to tree’s trunk when recovering a stuck vehicle, without causing any permanent damage. Without using a Tree Strap, the steel cable or synthetic winch rope will heavily gouge a tree’s bark under the extreme forces that winching can generate—damage that can ultimately kill the tree. Using a Tree Strap displaces all that energy and preserves the tree.
The AEV Tree Strap is made of 3-inch wide polyester webbing with reinforced eyelets and safety rated to a Minimum Breaking Strength (MBS) of 24,000 lbs. with a Working Load Limit (WLL) of 6,000 lbs. AEV is dedicated to bringing more safety and continuity to the recovery gear that 4WD enthusiasts around the world rely on to get out of these potentially hazardous or life threatening situations and this is the only Tree Strap in the aftermarket that complies with industrial rigging standards. To further maximize the service life of this Tree Strap, a unique edge guard was added for improved protection against cuts and abrasion.
Please Note: Minimum Breaking Strength (MBS) is the minimum force necessary to cause a recovery device to break or fail. Working Load Limit (WLL) is the recommended maximum force a recovery device is intended to safely support, when the force is applied in-line and through the centerline of the device. The WLL is calculated by dividing the Minimum Breaking Strength (MBS) by a safety factor that is generally around 4-to-1. For example, the AEV Snatch Block has an MBS of 52,000 LBS, so when divided by a safety factory of 4-to-1, the WLL becomes 13,000 LBS.
$ 69.00
Qty: