Premium Front Bumper For 2009-2018 Ram 1500

Ram 1500 Front Bumper

From: $2,115.00

Ram 1500 Front Bumper

AEV’s Premium Front Bumper is designed with maximum front end protection in mind. As the aftermarket’s first and only heavy duty stamped steel front bumper for the 2009-18 Ram 1500, the AEV Premium Front Bumper offers an unparalleled level of front end protection while also enhancing the truck’s appearance with its sleek, sophisticated styling.

The Ram 1500 is a lighter, more economical truck platform than its HD counterparts, making it the ideal choice for a dual purpose, daily driven vehicle. For that reason, AEV paid very close attention to the amount of additional weight was being added to the front end of this half-ton truck. By utilizing a variety of weight saving materials in addition to our stamped steel manufacturing process, AEV was able to minimize the amount of additional weight being added without compromising the Front Bumper’s strength or functionality. The Ram 1500 Premium Front Bumper weighs approximately 50lbs. less than the HD Premium Front Bumper.

Every component of AEV’s Premium Front Bumper is robust and designed to work hard. A 4mm thick stamped steel face provides a superior level of protection while also safely accommodating an AEV’s optional Winch Mount and a 10,000 lb. Warn Zeon 10-S winch to assist with vehicle recovery. Massive A356-T6 cast aluminum tow loops are rated to pass all OE load specifications and double as wear plates to slide over steep obstacles.

Lighting is another very important component to safe travel in remote locations. The Ram 1500 Premium Front Bumper includes two 6.7″ round fog light bezels that are designed to work with the optional 6.7” AEV/Vision X light kits (and other aftermarket brands) which are available in two versions – a 100w tungsten halogen version (Euro beam), producing 1,800 lumens and a 50w LED version, producing an incredible 3,200 lumens (up to 2,500 feet of usable light).

This bumper is compatible with front ParkSense. The optional AEV ParkSense Wiring Harness is highly recommended if your truck has Front ParkSense. If the factory sensor bezels are not black, you may paint them or purchase black bezels from Mopar. Outboard bezels (M-5VS87ZZZAA). Inboard bezels (M-5VS88ZZZAA).

 

Please note:Ram Front Park Assist is not currently compatible with the AEV Premium Front Bumper and will need to be disabled after installation. Installation of this Front Bumper requiresthe 2010+ HD Ram lower headlight filler panels. For the best fit and finish AEV recommends also installing this Front Bumper with HD Fender Flares, HD Grille and AEV’s Heat Reduction Hood. Due to vehicle limitations, bumper is not designed for winch larger than 10,000 lb capacity. Winch should use synthetic line to reduce weight. Bumper designed for and instructions based on installation of Warn Zeon 10-S winch with short Control Pack Relocation Kit (Warn PN: 89970).

This Front Bumper WILL NOT fit any new body style 2019 Ram 1500 models.

  • Fits 2009-18 Ram 1500
  • Compatible with all gas and diesel applications
  • Heavy duty A356-T6 cast aluminum tow loops
  • 4mm thick stamped steel face w/ 3/16” reinforcement
  • Optional 3/16” thick winch mount. AEV recommends using a 10,000lb. Warn Zeon 10-S winch
  • Includes two 6.7″ round fog light bezels accommodate the optional 6.7″ AEV/Vision X light kits
  • E-coated and powdercoated to maximum corrosion resistance
  • Made in the USA

Tech Specs:

Weight:
195 lbs.
Manufacturing Process:
Stamped Steel
Manufactured In:
United States
Application:
2009-2018 Ram 1500
California Prop 65 Warning

Installation:

Difficulty Level:
Advanced
Estimated Install Time:
6-7 Hours w/o Winch | 8-9 Hours w/ Winch and Lights

Installation Guides:

1500 Front Bumper (AEV30304AC)

AEV30365AB FPA_RetroFit