AEV Front Bumper for 2024+ GMC Sierra 2500 / 3500 HD
AEV Front Bumper for 2024+ GMC Sierra HD
From: $5,300.00
Upgrade your 2024+ GMC Sierra 2500 / 3500 HD with the rugged, dependable AEV Front Bumper. Built to handle the toughest terrain and designed with uncompromising quality, this bumper is the perfect solution for off-road enthusiasts and heavy-duty truck owners seeking both functionality and durability.
Please Note: While not required for installation, we strongly recommend users purchase the AEV Radiator Skid Plate. Doing so allows for the installation of Bumper Closeout Panels, which improves air flow and prevents unwanted water and debris intrusion. The Bumper Closeout Panels can be purchased at your local GM dealership using the following part numbers: 85049661 (LH) and 85049660 (RH).
KEY FEATURES:
- Seamless Compatibility: Designed for all 2024+ GMC Sierra 2500 / 3500 HD models, including gas and diesel engines, 2WD and 4WD, as well as SRW and DRW configurations. No fascia or grille changes are needed, with only minor modifications to wheel liners.
- Premium Finish: Features multi-stage E-coat/powder-coat finish for exceptional corrosion and UV resistance.
- Winch-Ready Design: Optimized for the COMEUP SOLO 12.5rs GMF Winch with the AEV Winch Mounting Kit for seamless integration. Other compact winches may fit but have not been validated by AEV.
- Enhanced Functionality: Fully compatible with Front Park Assist (FPA), factory fog lights, and an integrated block heater connection for added convenience. The block heater is strategically placed in a more protected location for safety.
- Recovery Performance: Features integrated cast iron tow hooks that replace OEM hooks for superior strength and recovery capability.
- Safety Standards: As an OEM-validated part, the AEV Front Bumper had to pass all of GM’s corrosion, vibration and front impact crash testing before going on the GMC Sierra HD AT4X AEV Edition.
Installation:
- Difficulty Level:
- Moderate
- Estimated Install Time:
- 6 Hours
- Required Tools:
-
- Common Hand Tools
- Trim Removal Tools
Installation Guides:
AEV Front Bumper for 2024+ Chevrolet Silverado HD and GMC Sierra HD Installation Guide
Product FAQs
- What makes this bumper different than all the other aftermarket bumpers out there?
Simply put, this is the ONLY bumper on the market that has been OEM tested and validated for the GM HD Trucks and this is the most complete front bumper system on the market.
- - Passes GM Corrosion requirements.
- - Winch compatible, specifically designed for COMEUP SOLO 12.5rs GMF
- - Compatible with all HD trim levels, gas, diesel, SRW, DRW, 2wd and 4wd. (Does require wheel liner modifications, trim template included)
- - Compatible with FPA (Front park assist)
- - Meets all GM crash safety standards
Maintains proper fascia gap and alignment to prevent damage or interference during movement/articulation.
- What HD trim levels will this bumper fit?
2024+ HD Trucks, Compatible with all HD trim levels, gas, diesel, SRW, DRW, 2wd and 4wd. (Does require wheel liner modifications, trim template included)
May fit late 2023 models with updated fascia.
- Is this bumper airbag compatible?
YES and this bumper meets all GM Crash safety standards. This front bumper was crash tested and validated by GM for the HD program.
- How do I install a winch?
The HD front bumper is designed to accept a COMEUP SOLO 12.5rs GMF Winch from the factory with the addition of AEV's Winch Install Kit.
- This bumper seems kind of expensive, what is included?
- Full Front Bumper system with Fog Lights, Tow Points, Block Heater, and full wire harness, bolt on ready
- Includes all mounting and reinforcement brackets
- Wheel Liner Trim Templates
- Winch Ready
- OEM Crashworthiness
- Compatible with FPA (front park assist – standard on all GMC, becoming standard on Chevy starting MY25
- Are the tow points functional?
Yes, the tow points are fully tested and validated above and beyond full vehicle GVWR.
- Will this bumper accept a light bar?
Yes. However, since there are so many LED light bars on the market, there are no holes drilled so you will have to measure and drill them accordingly to your specific light.
- Where is this bumper manufactured?
The HD Front Bumper is proudly made in the Midwest, all components are manufactured and assembled in North America.
