Details
AEV's Rear Bumper and Tire Carrier is like having a giant Swiss Army knife on the back of your JK Wrangler. It is the perfect solution for carrying all of the necessities for a successful overland or backcountry excursion. Our system begins with the Rear Bumper, which provides robust protection against highway and trail impacts. Included in the Bumper are dual 2.4 gallon liquid storage tanks, which are particularly handy on multi-day trips, and mounting provisions for our AEV Splash Guards.
Where our system really shines is with the chassis-mounted Tire Carrier, truly AEV's most versatile product. Not only does it provide a strong, vibration-free and effortless means of carrying tires up to 40" but it accommodates a laundry list of add-ons including our new Hi-Lift Jack/Pull-Pal Mount and 10-Gallon Fuel Caddy.
Our complete expedition-ready Rear Bumper and Tire Carrier System now holds:
| • 40-inch tire |
• 10-Gallon Fuel Caddy |
| • 5-Gallons of water | • Splash Guards |
| • Back-Up Light | • Pull-Pal Winch Anchor |
| • Hi-Lift Jack |
• Full-size shovel |
| • Sand Flag | • CB Antenna |
Both the Rear Bumper and Tire Carrier are designed so that either component can be installed and used individually, or they can be used together as a complete system.
Key Features:
| • Tailgate-synchronized swing-out tire carrier | • Anti-vibration tie-rod adjustment |
| • Carries up to 40" tires | • Anti-bind swing out cradle |
| • Chassis-mounted pivot | • Chassis-mounted tubular corner protection |
| • Liquid storage tanks plumbed together | • Chassis-mounted steel recovery mounts |
| • Dual 2.4 gallon liquid storage tanks | • No-slip tongue lifting points for High-Lift Jack |
| • Optional hand pump | • Accessory mast for work light and antennas |
| • Built-in step for easy roof rack access | • Textured black powdercoat finish |
| • Works with factory receiver hitch | • Built in shovel holster |
| • Takes weight of large tires off tailgate | • Bumper and Carrier can be used independently |
Tech Specs
Manufacturing Process: Formed steel (bumper, corner tubes, tire carrier)
Material: Polyethylene(storage tanks), heavy wall steel tube (tire carrier, corner tubes), 3/8" plate steel (tow points)
Coatings: E-coat, Super Durable polyester textured black powdercoat
Application: 2007+ JK Wrangler
Made In: United States
Variations
Tire Carrier only: Will install with the factory rear bumper with minor drilling to the bumper.
Rear Bumper only: Installs independent of the Tire Carrier. Note that the passenger side corner tank will have a hole where the tire carrier normally passes through.
FAQ
There are lots of rear bumpers and tires carriers, what makes AEV’s special?
Other companies offer one-touch tire carriers that open with the tailgate. What’s the benefit of AEV’s design?
In my experience tire carries tend to rattle. How about AEV’s?
Can I install the AEV Rear Bumper without the Tire Carrier?
Why do I need a tire carrier?
Why did AEV use bent tubing at the corners of its Rear Bumper instead of stamped steel like on its Front Bumper?
How large of a tire can I carry on the AEV Tire Carrier?
What is the Accessory Mast for on the AEV Tire Carrier?
Does the bumper have enough clearance to run 37-inch Tires?
What is the departure angle compared to stock?
Is the AEV Rear Bumper strong enough to be used as a lift point for my JK?
Does AEV’s Rear Bumper have strong, functional recovery points?
Doesn’t the shovel rattle around in the Tire Carrier’s Shovel Holster?
What is the weight of AEV’s Rear Bumper and Tire Carrier?
Will AEV’s bumper work with aftermarket flares?
Why does AEV use bronze bushings instead of bearings for the pivot point in its Tire Carrier?
What type of finish do the AEV Rear Bumper and Tire Carrier have?
What kind of maintenance do the AEV Rear Bumper & Tire Carrier require?
Why does AEV retain the factory receiver hitch?
Are the Bumper’s two water tanks really strong enough to handle trail impacts or to stand on?
Does the JK’s factory receiver hitch work with the AEV Rear Bumper?
How do I get the water out of the Bumper’s water tanks?
Can I drink the water from the water tanks?
Is there a drain in the water tanks for cleaning?
Do I need to worry about freezing water cracking the tanks?
How long does it take to install AEV’s Rear Bumper & Tire Carrier?
Where are AEV’s Rear Bumper and Tire Carrier made?
How can I be sure I’m buying authentic AEV products?
Install Guides
Difficulty Level: Moderate
Estimated Install Time: 4-6 hours
Click Here to download our Rear Bumper and Tire Carrier install sheet
If you're planning on using the AEV Tire Carrier with a stock JK bumper please download our stock rear bumper template sheet
Video
Customer Reviews
- Great bumper - Review by Austin
- Definitely a great bumper! The tire carrier alone stands out above the rest of the competition. However, if you plan on using the water tanks, make sure you get the water pump and install the hose that connects the tank BEFORE installing the bumper. The bumper does not come with the connecting hose and you will have to remove some parts to be able to install the hose correctly. Buy the pump and bumper together to save time! (Posted on 4/23/12)
- Worth the extra $$$! - Review by Mike
- I was disappointed in all the other bumpers I’ve seen. Your products are worth the extra money, I love the design of them, how they just "look right" on the jeep, and the attention to detail and features are incredible. Everything is designed in taste, just wanted to give you guys a kudos from engineers to fabricators, great job! (Posted on 3/21/12)
Customer Reviews
2 Item(s)
- Great bumper - Review by Austin
- Definitely a great bumper! The tire carrier alone stands out above the rest of the competition. However, if you plan on using the water tanks, make sure you get the water pump and install the hose that connects the tank BEFORE installing the bumper. The bumper does not come with the connecting hose and you will have to remove some parts to be able to install the hose correctly. Buy the pump and bumper together to save time! (Posted on 4/23/12)
- Worth the extra $$$! - Review by Mike
- I was disappointed in all the other bumpers I’ve seen. Your products are worth the extra money, I love the design of them, how they just "look right" on the jeep, and the attention to detail and features are incredible. Everything is designed in taste, just wanted to give you guys a kudos from engineers to fabricators, great job! (Posted on 3/21/12)
2 Item(s)
You have no items in your shopping cart.
